How to adjust trekking poles
① Generally, three-section trekking poles have two sections that can be adjusted. First, loosen all the trekking poles.
② Extend the pole near the bottom to the maximum limit length, there are scales on the trekking pole for reference.
③ Hold the trekking pole on a flat surface to adjust the length of the trekking pole, the arm hangs down naturally, take the elbow as the fulcrum, and raise the forearm to 90 degrees with the upper arm. Then adjust the tip of the trekking pole downward until it touches the ground; or place the tip of the trekking pole 5-8 cm under the armpit, and then adjust the tip of the pole downward until it touches the ground.
④ Tighten all the poles of the trekking pole.
⑤ The other trekking pole that has not been adjusted can be adjusted to the same length as the one with the locked length.
⑥ When adjusting the trekking poles, the maximum adjustment length displayed on the trekking poles should not be exceeded. When purchasing the trekking poles, you can first adjust the length to determine whether you can buy the trekking poles of the appropriate length.
At present, three-section adjustable trekking poles are generally used in mountaineering and traversing activities, with aluminum alloy/titanium alloy struts, carbon tungsten steel pointed tips, handle pads designed according to the palm, and a snow ring that can be quickly disassembled; advanced trekking poles also Equipped with a shock absorber system to reduce the burden on the arm! The following is a brief introduction to each part.View detail